-
Nnwale ike na-agbaji na njikọ ngwa ngwa
Aha ngwaahịa: LD-2 Breaking Force and Connection fastness Tester
-
ZC15811-F Medical agịga penetration Force Tester
Onye nleba anya na-anabata ihuenyo mmetụ agba 5.7-inch iji gosi menus: nomial n'èzí dayameta nke agịga, ụdị mgbidi tubing, ule, oge ule, mgbago elu, mgbada, oge na nhazi.ọ na-egosiputa ike ntinye kachasị na ike ise kachasị elu (ya bụ F0, F1, F2, F3 na F4) ozugbo, na ngwa nbipute arụnyere nwere ike ibipụta akụkọ ahụ.
Mgbidi tubing: mgbidi nkịtị, mgbidi dị gịrịgịrị, ma ọ bụ mgbidi dị mkpa bụ nhọrọ
Ọnụ n'èzí dayameta nke agịga: 0.2mm ~ 1.6mm
Ikike ibu: 0N ~ 5N, na izi ezi nke ± 0.01N.
Ọsọ mmegharị: 100mm/min
Ndochi akpụkpọ: Polyurethane foil kwekọrọ na GB 15811-2001 -
ZG9626-F agịga ahụike ( Tubing ) Onye nyocha isi ike
PLC na-achịkwa onye nyocha ahụ, ọ na-anakwere ihuenyo mmetụ agba 5.7 inch iji gosi menus: metric size of tubing, ụdị mgbidi tubing, ogologo oge, ike na-ehulata, mgbagha kachasị, , nhazi mbipụta, nnwale, elu, mgbada, oge na nhazi ọkwa, na ngwa nbipute bulit nwere ike ibipụta akụkọ nyocha.
Mgbidi tubing: mgbidi nkịtị, mgbidi dị gịrịgịrị, ma ọ bụ mgbidi dị mkpa bụ nhọrọ.
metric ahaziri nha nke tubing: 0.2mm ~ 4.5mm
ike na-ehulata: 5.5N ~ 60N, na izi ezi nke ± 0.1N.
Ibu Ibu: itinye ala na ọnụego 1mm / min na tubing nke ike na-ehulata.
Ogologo: 5mm ~ 50mm (11 nkọwa) na izi ezi nke ± 0.1mm
Nnwale mgbagha: 0 ~ 0.8mm na izi ezi nke ± 0.01mm -
ZR9626-D agịga ahụike ( Tubing ) Nnwale mgbaji na-eguzogide
Onye nyocha ahụ na-eji LCD agba 5.7 inch iji gosi menus: ụdị mgbidi tubing, akụkụ na-ehulata, ahapụtara, nha metric nke tubing, anya n'etiti nkwado siri ike na isi ngwa nke ike ịgbagọ, na ọnụ ọgụgụ okirikiri ịgbagọ, PLC ghọtara ntọala mmemme. , nke na-ahụ na a na-eme ule na-akpaghị aka.
Mgbidi tubing: mgbidi nkịtị, mgbidi dị gịrịgịrị, ma ọ bụ mgbidi dị mkpa bụ nhọrọ
metric ahaziri nha nke tubing: 0.05mm ~ 4.5mm
Ugboro n'okpuru ule: 0.5Hz
Ehulata akụkụ: 15°, 20° na 25°,
Ebe dị anya na-ehulata: na izi ezi nke ± 0.1mm,
Ọnụ ọgụgụ nke cycles: ka ehulata tubing n'otu ụzọ wee gaa n'akụkụ nke ọzọ, maka 20cycles. -
ZF15810-D Medical Syringe Ikuku Nnwale
Nnwale nrụgide na-adịghị mma: a na-erute manometer agụ 88kpa ambient ikuku ikuku;njehie: n'ime ± 0.5kpa;na LED dijitalụ ngosi
Oge ule: nwere ike ịgbanwe site na 1 sekọnd ruo 10 nkeji;n'ime LED dijitalụ ngosi.
(Ọgụgụ nrụgide na-adịghị mma gosipụtara na manometer agaghị agbanwe ± 0.5kpa maka nkeji 1.) -
ZH15810-D Ihe nlere mmịfe ọgwụ sirinji
Onye nyocha ahụ na-anabata ihuenyo mmetụ agba 5.7 inch iji gosi menus, N'iji njikwa PLC, enwere ike ịhọrọ ikike aha sirinji;ihuenyo nwere ike na-aghọta ozugbo ngosi nke ike chọrọ ibido ije nke plunger, pụtara ike n'oge nloghachi nke plunger, kacha na kacha nta ike n'oge nloghachi nke plunger, na eserese nke agha chọrọ iji rụọ ọrụ plunger;A na-enye nsonaazụ ule na-akpaghị aka, na ngwa nbipute arụnyere nwere ike ibipụta akụkọ nyocha.
Ibu Ibu:;njehie: 1N ~ 40N njehie: n'ime ± 0.3N
Nwale ọsọ: (100±5)mm/min
Ikike nke sirinji: enwere ike ịhọrọ site na 1ml ruo 60ml.ihe niile anaghị agbanwe ±0.5kpa maka 1 nkeji.)
-
ZZ15810-D Ihe nleba anya mmiri mmiri sirinji
Onye nleba anya na-anabata ihuenyo mmetụ agba nke 5.7 inch iji gosi menus: ikike aha sirinji, ike akụkụ na nrụgide axial maka nnwale ntanye, yana oge itinye ike na plunger, na ngwa nbipute etinyere nwere ike ibipụta akụkọ nnwale ahụ.PLC na-achịkwa mkparịta ụka igwe mmadụ na ihuenyo mmetụ aka.
1.Product aha: Ngwa nyocha nke sirinji ọgwụ
2. Akụkụ ike: 0.25N ~ 3N;njehie: n'ime ± 5%
3.Axial mgbali: 100kpa ~ 400kpa;njehie: n'ime ± 5%
4.Nominal ikike nke sirinji: họrọ site na 1ml ruo 60ml
5.Oge ule: 30S;njehie: n'ime ± 1s -
ZD1962-T Conical Fittings nwere 6% Luer Taper Multipurpose Tester
Onye nleba anya dabere na njikwa PLC wee nabata ihuenyo mmetụ agba 5.7 inch iji gosi menus, ndị ọrụ nwere ike iji igodo mmetụ họrọ ikike sirinji ma ọ bụ ọnụ ala n'èzí agịga dị ka nkọwapụta ngwaahịa.Axial ike , torque, njide oge, hydraulic mgbali na sparation ike nwere ike igosipụta n'oge ule, tester nwere ike nwalee ntapu mmiri mmiri, ikuku ntapu, nkewa ike, unscrewing torque, mfe nke mgbakọ, iguzogide overriding na nrụgide cracking nke conical (mkpọchi. ) dabara na taper 6% (luer) maka sirinji, agịga na ụfọdụ ngwa ahụike ndị ọzọ, dị ka infusion set , transfusion sets, infusion injections, tubes, filter for anesthescia, wdg wuru - na ngwa nbipute nwere ike ibipụta akụkọ nyocha.
-
Onye Nleta Ntufu ikuku YM-B Maka Ngwa Ọgwụ
A na-eji ihe nleba anya pụrụ iche maka ule ntapu ikuku maka ngwaọrụ ahụike, ọdabara na setịpụ infusion, setịpụ mmịnye, agịga infusion, nzacha maka mgbakasị ahụ, tubing, catheters, njikọ ngwa ngwa, wdg.
Nsonaazụ nrụgide: settable site na 20kpa ruo 200kpa n'elu ikuku ikuku mpaghara; na ngosipụta dijitalụ LED;njehie: n'ime ± 2.5% nke ọgụgụ
Ogologo oge: 5 sekọnd~ nkeji 99.9;na ihe ngosi dijitalụ LED;njehie: n'ime ± 1s -
SY-B Insufion Pump Nleta Ọnụego Nleba
Emebere ma rụpụta onye nyocha ahụ dịka mbipụta ọhụrụ nke YY0451 si dị “Injectiors otu eji eme ihe maka nchịkwa ambulatory na-aga n'ihu nke ngwaahịa ahụike site na ụzọ parenteral” na ISO/DIS 28620 “ngwaọrụ ọgwụ-ngwaọrụ infusion na-anaghị ebugharị na ọkụ eletrik”.Ọ nwere ike nwalee ọnụego nrịbama na ọsọ ọsọ ọsọ ọsọ nke nfuli infusion asatọ n'otu oge ma gosipụta ngbanwe ọnụego nke mgbapụta infusion ọ bụla.
Onye nleba anya dabere na njikwa PLC wee nabata ihuenyo mmetụ iji gosi menus.Ndị na-arụ ọrụ nwere ike iji igodo mmetụ họrọ parampat ule wee ghọta nnwale akpaka.Na ngwa nbipute arụnyere nwere ike ibipụta akụkọ nnwale.
Mkpebi: 0.01g;njehie: n'ime ± 1% nke ọgụgụ -
Ihe nleba anya ngwa ngwa ngwaọrụ ahụike YL-D
Emebere onye nnwale ahụ dịka ụkpụrụ mba siri dị ma jiri ya mee ihe maka nnwale ọnụego ngwaọrụ ahụike.
Nsonaazụ nrụgide: settable site na 10kPa ruo 300kPa n'elu loaca ikuku ikuku, yana LED dijitalụ ngosi, njehie: n'ime ± 2.5% nke ọgụgụ.
Ogologo oge: 5 sekọnd ~ 99.9 nkeji, n'ime LED dijitalụ ngosi, njehie: n'ime ± 1s.
Ọdabara na usoro infusion, usoro mmịnye ọbara, agịga infusion, catheters, ihe nzacha maka mgbakasị ahụ, wdg. -
DF-0174A Ihe Nnwale Ịwa Ahụ
Emebere ihe nleba anya ma rụpụta ya dị ka YY0174-2005 “agụba Scalpel”.Ọ bụ maka ịnwale ịdị nkọ nke agụba ịwa ahụ.Ọ na-egosiputa ike achọrọ iji gbutu sutures ịwa ahụ na ike ịbelata kacha na ozugbo.
Ọ mejupụtara PLC, ihuenyo mmetụ, ihe nleba anya ike, ngalaba nnyefe, ngwa nbipute, wdg. Ọ dị mfe iji rụọ ọrụ ma gosipụta nke ọma.Ma ọ na-egosipụta oke nkenke na ezi ntụkwasị obi.
Oke nha nha ike: 0 ~ 15N;mkpebi: 0.001N;njehie: n'ime ± 0.01N
Ọsọ ule: 600mm ± 60mm/min
